Metal crusher

The metal crusher is mainly used for the crushing and crushing of various scrap metal such as can crushing, color steel tile crushing, scrapping automobile crushing, paint barrel crushing, iron chip crushing and so on. Achieve fine processing of scrap metal to achieve a better prospect of interest in scrap metal transportation costs and recycling prices. In the structure of the equipment, the main casing is made of special thick steel plate, and the inner lining is made of high-manganese steel casting to protect the outer body. In the rotor part of the main machine, the machine adopts the disc-type fastening rotating mechanism, and there are several on the rotor. The steel plates are mounted on the horizontal axis (the number and diameter of the steel plates are based on the model). There are 6 pins on the circumference of the steel plate. There are several hammers in the axial direction for crushing the material. The spindle is supported by ball bearings. The circulating oil is forcibly lubricated and cooled, and is equipped with a temperature sensor to ensure high-speed and stable operation of the equipment. The crushing operation of the scrap steel is completed by the cooperation of the above casing and the main shaft.
Metal crusher

Structural principle In the workflow, the metal crusher is fed into the equipment through the feeding conveyor metal to force the feeding and crushing port, and the metal is subjected to primary crushing through the crushing process of the pressing roller and the coarse crushing shaft, and the metal after the primary crushing enters the main cavity of the device. Driven by the high-speed and high-torque motor, the hammer on the main rotor alternately strikes the metal entering the main cavity through the space between the lining and the hammer. The crushing block can be fully and effectively in the crushing cavity. Finely pulverized, the torn material to be crushed into a conformable crushed material, and then flowed down from the screen. The crushed material is separated by air swirling sorting system, and the paint, rust and waste plastic in the metal are separated, and the material discharged at the bottom of the equipment is transported to the collecting point through the conveying equipment, and the non-magnetic material contained in the material is collected in the process. Under the action of the magnetic separator, the production line is sorted and discharged to the non-magnetic material pile. In addition, the entire system is equipped with a dust removal device to reduce the dust pollution hazard generated during the production process. The equipment mainly has the advantages of high output, low energy consumption, high efficiency, uniform discharge and fineness. Moreover, when the device is used, the noise is low, pollution-free, and the operation is simple and the maintenance is convenient.

Metal crusher

model	power	Application range	Rotating speed	Processing capacity(t/h)	Dimensions(mm)	weight(t)
800PSJ-C	37-55	Cans, thin iron, light metal	1250	0.7-1	380016001800	3.2
1000PSJ-C	45-75	Small metal packing, cans, scrap metal	1250	0.8-1.5	256018002200	7.6
1300PSJ-C	90-150	Scrap metal blocks such as bicycles and motorcycles	860	2-4	400035003200	11.5-26
1600PSJ-C	200-280	Scrap metal parts such as automobile cutting parts and paint buckets	750	4-6	480040003800	16.6-35
1800PSJ-C	220-450	Scrapped large scrap metal blocks	650	6-10	480041004000	32-48
2000PSJ-C	315-630	Scrapped large scrap metal blocks	650	8-12	500045004300	35-65
2200PSJ-C	500-900	Scrapped large scrap metal blocks	650	15-20	500045004300	35-65
2400PSJ-C	1250-2250	Large metal packing, car shell	650	20-45	630048004500	85-120
2800PSJ-C	1600-3300	Various scrap metal	650	70-100	640052004800	145-230
3000PSJ-C	3300-4400	Various scrap metal	650	110-140	850072005500	280-760